Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Cary Homeowners
A chimney that drafts poorly, stains the ceiling, or smells of smoke when the fire isn’t lit is usually telling you something three feet up the flue that you can’t see from the hearth. That’s the problem an inspection solves: it finds the defect before a fire does, and it puts the evidence in your hands instead of leaving you to trust a stranger’s word. Our technicians have up to 9 years of experience, we document what we find with camera images you keep, and a sweep or inspection booked in Cary can often be scheduled the same day. We answer 24/7 on (833) 519-6077, with fast dispatch from 7am to 7pm, Sunday through Friday.

Fireplace Inspection
Fireplace Inspection is the focused look at the firebox, damper, smoke shelf, and the first few feet of flue that your open hearth or insert depends on to draft and burn safely. You need one when the fire smokes into the room, when the damper sticks or won’t close, when the firebox brick shows gaps or white staining, or simply before the first fire of the season. We open the firebox, check the damper and smoke chamber, and confirm the appliance is clear and sound. In Cary, a typical fireplace inspection runs $99-$175 depending on how much camera work the flue needs. Call (833) 519-6077 for an exact quote; estimates are free.
What We Check Inside the Firebox
We look for cracked firebrick, loose mortar joints, and any gap where heat can reach framing or masonry behind the firebox. We also test the damper for a full open-and-close and check the smoke shelf for creosote buildup that can cause smoke to roll forward. Anything we find gets photographed so you can see it for yourself.
Wood Stove and Insert Checks
An insert or freestanding stove has its own clearances and connector pipe, and those are what we inspect first. We verify the stovepipe connections, look for rust or joint separation, and check that the appliance is connected to a sound flue. Liner condition and the way a stove was tied into the chimney matters more than the stove itself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole assembly, from the crown and cap at the top to the firebox at the bottom, so you get a full picture rather than one section. You need one when you’re buying or selling a home, after a chimney fire or lightning strike, when you switch fuels or install an appliance, or when it’s simply been a few seasons since anyone looked. We work through the exterior masonry, the cap and crown, the flashing, and the flue with a camera, then write up what we find in plain terms. A typical inspection in Cary runs $125-$350 depending on the level and whether camera work is included. Call (833) 519-6077 for a quote.
Exterior Masonry and Crown
Cracking crowns, spalling brick, and failed mortar joints let water in and cost far more later than they do now. We check the crown for separation from the flue, look for leaning or step cracking in the stack, and test the flashing where the chimney meets the roof. These are the fixes that get deferred and turn into rebuilds.
Interior Flue and Appliance Connection
Inside, we check the flue for gaps, offsets, and improper liner connections, and confirm the appliance venting matches the flue size. We also look at clearances to combustible framing in the attic and chase, since those are easy to get wrong and impossible to notice from the living room. Photos of anything suspect go in the report.
Chimney Flue Inspection
Chimney Flue Inspection is a close examination of the flue itself, the passage the smoke travels through, checking its size, its condition, and whether it’s still lined and unobstructed. You need one when you’ve had a fire, when you notice a smoke smell in warm weather, when a liner was installed years ago and you don’t know its condition, or when you’re adding a gas appliance or insert. We run a camera down the flue, check for gaps between liner sections, cracked clay tile, and any hidden offsets, and photograph what we find. A flue inspection in Cary typically runs $150-$300 depending on access and camera time. Call (833) 519-6077 for an exact quote; estimates are free.
Clay Tile and Liner Section Checks
Clay tile flues develop hairline cracks as they heat and cool over the years, and a single cracked tile can let heat reach framing. We check each tile joint and confirm the liner is continuous with no offset. When the tile is failing, HeatShield resurfacing restores the flue from the inside without tearing it out.
Flue Sizing and Draft
A flue that’s too large for the appliance runs cold and drafts poorly; one that’s too small chokes the fire and pushes smoke back into the room. We measure the flue and compare it to the appliance’s requirements. Sizing problems are common after an insert or stove is swapped in without relining.
Chimney Fire
Chimney Fire is the ignition of creosote and soot that has built up on the flue walls, and it can burn hot enough to crack tile, warp a liner, or spread into the structure without the homeowner realizing it happened. You need an inspection after any chimney fire, even one that seemed to go out on its own, because the damage is usually invisible from below. You also need one before the buildup gets that heavy, which is why we recommend a sweep once the creosote layer reaches a quarter inch. A post-fire inspection in Cary runs $175-$350, and if repair is needed we quote it separately. Call (833) 519-6077 for an exact quote; estimates are free.
What a Chimney Fire Leaves Behind
The fire itself may only last a minute or two, but the heat it produces can crack clay tiles, distort a metal liner, and open gaps that were fine before. We inspect the flue with a camera after any fire to see what actually happened. Some fires leave nothing but soot; some leave a liner that needs replacement before the chimney is used again.
Creosote Stages and Sweep Timing
Creosote builds in three stages, from a light soot to a hardened, glazed coating that’s much harder to remove. The glazed stage is the one that burns hottest and is the reason we recommend a sweep before the first fire of the season. If we find heavy glazing, we’ll tell you what removing it takes.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the standard inspection required when a property changes hands, when an appliance or fuel type changes, or after an event like a chimney fire or earthquake. It goes beyond a visual look from the hearth and includes the accessible portions of the attic, crawl space, and roof, plus a camera inspection of the flue. In Cary, a Level 2 inspection typically runs $225-$350 and includes photos and a written report you can hand to a buyer, seller, or insurer. Call (833) 519-6077 for an exact quote; estimates are free.
When a Level 2 Is Required
Real estate transactions are the most common trigger, since buyers and their lenders want documented chimney condition before closing. Fuel conversions, new appliance installations, and post-fire checks also call for one. If you’re unsure which level you need, ask us and we’ll tell you plainly.
What the Report Includes
You get camera images of the flue, photos of any exterior or attic issues, and a written summary of what was found with clear recommendations. We separate what needs attention now from what can safely wait. Nothing in the report is a guess; if we recommend work, the photo shows why.
Chimney Leak
Chimney Leak is water getting into the chimney or the home through the crown, flashing, cap, or masonry, and it shows up as stained ceilings, damp masonry, or a musty smell after rain. You need an inspection when you see those signs, when the chimney cap is missing or damaged, or when water is pooling in the firebox after storms. We check the crown for cracks, the flashing at the roof line, the cap, and the mortar joints, then identify the actual entry point rather than guessing. In Cary, leak diagnosis and inspection runs $150-$300 depending on how much of the roof and flashing we need to access. Call (833) 519-6077 for an exact quote; estimates are free.
Common Entry Points for Water
A cracked crown is the most frequent culprit, since it lets water run down between the flue and the masonry. Failed flashing where the chimney meets the roof is next, followed by a missing or rusted cap. Spalling brick and open mortar joints soak up water like a sponge and pass it inward.
Cap, Crown, and Flashing Repairs
Most leak repairs are straightforward once the source is confirmed: a new stainless cap, a crown repair with proper slope, or flashing resealed and rebuilt. Skipping the diagnosis and slapping sealant on the outside rarely holds. We fix the source, not the symptom.

Chimney Camera Inspection
Chimney Camera Inspection is the use of a specialized flue camera to see inside the chimney from top to bottom, including offsets, tile joints, and sections that can’t be reached by eye from the firebox. You need one whenever a defect is suspected but not visible, when you’re buying a home, after a fire, or when the chimney has never been inspected. We run a camera through the flue, record the findings, and show you the footage so you can see exactly what we see. A camera inspection in Cary typically runs $150-$275 depending on access and flue length. Call (833) 519-6077 for an exact quote; estimates are free.
What the Camera Reveals
The camera shows tile cracks, gaps between liner sections, excessive creosote, missing mortar, and offsets that shouldn’t be there. It also confirms whether a liner was installed correctly and whether the flue is clear. These are the things that no amount of peering up from the hearth can tell you.
Seeing the Footage for Yourself
We don’t ask you to take our word for the condition of your flue; we show you the recording. If we recommend a repair, you’ll see the exact spot that warrants it. That’s how you tell a real problem from an upsell.
Brands We Service
We work with DuraFlex flexible liner systems and know where they wear, how the joints hold up over time, and what a proper installation looks like at the top plate and the appliance connection. We also use HeatShield for flue resurfacing, which restores a failing clay tile flue from the inside without demolition, and we fit Gelco caps and Olympia Chimney components for the kind of weather-tight seal that keeps water out.
Famco chimney products show up in our work too, particularly around caps and top-sealing dampers where fit and finish matter. Whether you have a DuraFlex liner, a HeatShield-resurfaced flue, a Gelco cap, an Olympia Chimney component, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. This usually points to a blocked flue, a sizing problem, or a failing damper. It won’t fix itself, and burning through it can push carbon monoxide into the house.
- Water stains on the ceiling or chimney breast. Staining after rain means water is entering somewhere above, and the entry point is rarely directly above the stain. The longer it goes, the more masonry it damages.
- A strong creosote or smoke smell in warm weather. That smell is creosote off-gassing as the chimney warms, and it’s a sign the flue needs cleaning before the next fire.
- Cracked or crumbling mortar and brick. Spalling brick and open joints let water in and weaken the stack. Left alone, small repairs become a rebuild.
- A chimney fire you think went out. Fires can crack tile and warp liners invisibly. An inspection after any fire confirms whether the flue is still sound.
Our Process, Step by Step
- 1
We talk through the symptoms first. Before we arrive, we ask what you’ve noticed: smoke, smell, stains, or a recent fire. It tells us where to look and helps us bring the right tools.
- 2
We inspect the accessible portions. We check the firebox, damper, smoke chamber, flue, crown, cap, and flashing, and go into the attic and onto the roof where access allows. Every finding gets photographed.
- 3
We run a camera through the flue. The camera shows tile joints, liner connections, and any offsets, and we record the footage. This is how we find defects that a visual check from below misses entirely.
- 4
We write up what we found in plain terms. You get a report with photos and a clear separation between what needs attention now and what can safely wait. We don’t push repairs you don’t need.
- 5
We quote any repair in writing. If work is needed, you get a written estimate before anything is scheduled, and the final price is set by that estimate. There’s no surprise charge after the fact.
How Much Does Chimney Inspection Cost in Cary?
A typical fireplace inspection in Cary runs $99-$175, a flue camera inspection runs $150-$275, and a Level 2 inspection for a real estate transaction runs $225-$350. Sweeps, when an inspection turns up heavy creosote, are quoted separately and priced per job, not by a flat fee that ignores the condition of the flue.
What moves the price is access: a steep roof, a chimney with multiple flues, or a flue with offsets that takes longer to camera. Repairs found during the inspection, like a cracked crown or a failing liner, are quoted separately in writing before any work is scheduled. You’ll never get a verbal estimate that changes once the work starts.
The way to avoid overpaying is to ask what’s included before you book. Our inspections include a written report with photos, not just a verbal “looks fine.” You should know what level of inspection you’re getting, whether camera work is included, and whether the report will stand up to a buyer’s scrutiny. In Cary, we give you all three in writing.
Call (833) 519-6077 for an exact quote; estimates are free. The written estimate sets the final price, and we say plainly when a repair can safely wait.
Our Service Area Near Cary
We serve homeowners throughout Cary and the surrounding towns, including Apex and Morrisville to the west, Holly Springs to the south, and the Research Triangle Park area. We’re also the team to call in Youngsville, Raleigh, and Durham when a chimney needs a real inspection. Response times vary by location, and we book inspections around your schedule, with fast dispatch from 7am to 7pm, Sunday through Friday. See our Cary page for local details, or our Raleigh page if you’re just outside our core area.
Serving Cary, NC – Our Local Coverage Area
We serve Cary and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Cary
A chimney inspection is a structured evaluation of the firebox, flue, crown, cap, flashing, and accessible masonry to confirm the chimney is safe to use. It goes beyond a cleaning and includes photos and a written report of what was found. In Cary, we offer three levels depending on what you need.
Most inspections take 45 minutes to an hour and a half, depending on the level and how much camera work is needed. A Level 2 inspection that includes the attic, roof, and flue camera takes longer than a basic fireplace check. We’ll tell you what to expect when you book.
In Cary, a fireplace inspection typically runs $99-$175, a flue camera inspection $150-$275, and a Level 2 inspection $225-$350. The written estimate you get before the visit sets the final price. Call (833) 519-6077 for an exact quote; estimates are free.
Yes. We install and service DuraFlex flexible liners and use HeatShield for flue resurfacing when the tiles are failing. We also fit Gelco, Olympia Chimney, and Famco caps and components. Whether you have one of these or another make, we can help.
Often, yes. We book inspections around your schedule, and same-day openings are common in Cary. Call (833) 519-6077 to book. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
Our inspections include a written report and photos of everything we find, and any repair we recommend is backed by the materials and workmanship that go into it. We don’t push repairs you don’t need, and we say when work can safely wait. Ask about the specifics of any repair when we quote it.
Clear the area around the fireplace so we can access the hearth, and make sure we can get to the attic and roof access. Let us know if you’ve had a fire, a leak, or smoke issues, since that helps us focus. If you know the age of your liner or appliance, have that handy for the technician.
Schedule Your Chimney Inspection Service in Cary Today
Before the first fire of the season, get a straight answer about the condition of your chimney from a team that only does chimney work. Call (833) 519-6077 to book an inspection in Cary, and we’ll document what we find with photos and a written report. No-obligation estimates, and we answer 24/7.
Written by the team at Chimney Sweep Cary.