Chimney Company in Coats - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 519-6077

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Coats, NC

Chimney inspection in Coats, NC starts with one question: what is actually inside the flue of a house that may have been burning wood for fifty years? Many homes here are older farmhouses and modest ranches with masonry fireplaces or wood stoves added later, and a good share still carry original clay tile liners that have cracked through decades of heating and cooling. We inspect those chimneys with a camera, show you the footage, and tell you plainly what can safely wait. Call (833) 519-6077 to book.

Call (833) 519-6077

Why Coats Homes Are Different

Coats sits just east of the Sandhills in Harnett County, and that position shapes the smoke. The pine woods around town produce a sooty, resinous smoke that builds creosote faster and in a different texture than the hardwood smoke you’d find deeper into the Piedmont. A chimney here can go from “a little glaze” to “needs attention” in a single cold stretch.

The winters are mild on paper, but cold snaps still push people to burn hard, and the occasional ice storm or hurricane remnant knocks the power out and turns the fireplace into the heat source for a few days. That stop-and-start pattern matters. Slow, cool, smoldering fires deposit more creosote than a hot burn, and that’s exactly how a backup heat source gets used.

The housing stock is the other half of the story. Coats is mostly older single-family homes, plenty of mid-century farmhouses and small ranches, many with fireplaces or stoves added long after the house was built. Several have stayed in the same family for generations. What we find in those flues is often an original clay tile liner, cracked from years of expansion and contraction, with no modern liner behind it. That’s the hidden hazard in this part of Harnett County, and it doesn’t announce itself.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Coats Services

Most calls we take in Coats come down to two jobs: getting the creosote out and getting the structure sound again. Here’s what each involves locally.

Chimney Sweep in Coats

In Coats, a sweep is a fire-safety job before it’s a maintenance job. When wood heat is your backup for power outages and cold snaps, the flue loads up with resinous pine creosote that has to come out with the right tools, not a wire brush and hope. We sweep, then run a camera to confirm the flue is clear and the liner is intact, and we show you the photo record. If you want the details of how a visit runs, see Chimney Sweep in Coats.

Chimney Sweep in Coats

Chimney Repair in Coats

Repair work in Coats usually means one of two things: a cracked clay tile liner that needs resurfacing or relining, or mortar and crown damage from years of weather on an older stack. We use HeatShield for flue resurfacing where it fits and DuraFlex flexible liner systems when a full reline is the right answer. Either way, we explain what failed and why before anything gets torn apart. The full scope is on our Chimney Repair in Coats page.

Chimney Repair in Coats
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 519-6077

Chimney Inspection in Coats

Chimney Inspection in Coats

Chimney Inspection in Coats is where we earn the trust, because so much of the housing here is old enough to hide a problem. Farmhouses and modest ranches from the mid-20th century often carry original clay tile liners with hairline cracks from decades of heating and cooling. We inspect the whole system, document what we find with camera footage and photos, and tell you honestly what needs fixing now and what can wait.

Fireplace Inspection

A fireplace inspection looks at the firebox, damper, smoke chamber and the first few feet of flue, which is where the heaviest creosote sits in a Coats home burning pine.

Signs you need it

You’re seeing cracked firebrick, a damper that won’t seal, or a smoky smell in the room when the fire isn’t lit.

What it costs in Coats

A fireplace inspection typically runs $99 to $250, and a Level 2 inspection with camera runs $150 to $400; the written estimate sets the final price.

How we do it

We open the firebox, check the damper and smoke chamber by hand and light, then run a camera up the flue and photograph every defect we find.

Level 2 Chimney Inspection

A Level 2 inspection goes beyond what you can see from the hearth. It covers the full flue with a camera and includes the attic, crawlspace and accessible exterior of the chimney, which is the right call for a Coats home that’s changed hands, changed appliances, or had a wood stove added over the years.

Signs you need it

You’re buying or selling the house, you’ve added a stove or insert, or the chimney has been through a storm or a chimney fire.

What it costs in Coats

A Level 2 inspection typically runs $150 to $400 depending on how much of the chimney we can access and how many flues it has.

How we do it

We run a camera through every flue, inspect the attic and crawlspace penetration, check the exterior and crown, and give you a written report with photos.

What Chimney Inspection Costs in Coats

Inspection pricing in Coats depends on the level of inspection and how many flues the chimney has. These are typical ranges, not a quote.

Item Typical range in Coats
Level 1 visual inspection $99 – $250
Level 2 inspection with camera $150 – $400
Camera inspection and photo report add-on $75 – $200

Do I need a chimney inspection before selling a house in Coats?

It’s not legally required, but a Level 2 inspection is the smartest move before a sale in Coats. It documents the liner and structure, and buyers ask for it. Call (833) 519-6077 for a free estimate.

How often should a Coats chimney be inspected?

Once a year if you burn wood regularly, and after any chimney fire, storm damage or appliance change. In Coats, the pine smoke load makes that annual check matter. Call (833) 519-6077 for an exact quote – estimates are free.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 519-6077

Brands We Service in Coats

We install and work with professional-trade chimney materials: DuraFlex flexible liner systems, HeatShield flue resurfacing, and Gelco caps and components. These are industry-grade parts, not hardware-store substitutes, and they change what’s possible on a Coats chimney repair. See our brands for the full list. Turnaround depends on part availability, and we’ll tell you the timeline up front.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Coats, NC

Every price below is a typical range for Coats, not a firm quote. The written estimate you get before any work begins sets the final price.

Service Typical range in Coats
Level 1 visual inspection $99 – $250
Level 2 inspection with camera $150 – $400
Camera inspection and photo report add-on $75 – $200
Standard chimney sweep $150 – $300
Heavy creosote removal (Glaze 3) $300 – $600
Chimney cap installation $150 – $400
Crown repair or rebuild $300 – $800
Flue resurfacing with HeatShield $1,000 – $2,500
DuraFlex stainless liner installation $2,000 – $5,000
Masonry repair and tuckpointing $400 – $1,500

In Coats, price climbs when a chimney turns out to have heavy glazed creosote, a cracked original tile liner, or masonry that’s been weathering for decades without a cap. Because so many homes here were built before modern liners, a “simple” sweep can turn into a reline conversation – we tell you which is actually needed, with camera evidence, and price the whole job upfront.

Want to talk it through?Free estimate, price agreed before work starts
Call (833) 519-6077

Neighborhoods We Serve in Coats

We work throughout Coats and the rural Harnett County roads around it, including the older farmhouse properties and small ranches where wood heat is still in regular use. Drive times are short here, so scheduling across town is straightforward. If you’re on the edge of town or out on a county road, tell us your cross street when you call and we’ll confirm coverage.

  • Downtown Coats and the streets around the main intersection
  • Coats, 27521 – the town core and surrounding residential blocks
  • Rural Harnett County roads east and south of town
  • Older farmhouse properties along the county routes

Service Area – Cities Near Coats

Coats is a short drive from several towns we serve regularly. If you’re just outside our Coats coverage, we likely still reach you from one of these nearby areas: Buies Creek, NC, Mamers, NC, Broadway, NC, and Cary, NC. Our main base of operations is Cary, and we schedule around the towns near Coats throughout the week. Call and we’ll confirm whether your address falls in our service area.

Serving Coats, NC – Our Local Coverage Area

We serve Coats and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Coats

Ready to get started? Free estimates in Coats
Call (833) 519-6077

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Coats Customers Say

★★★★★ 4.9 from 7+ reviews

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Darnell Hampton

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

- Holly Brooks

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Kevin Tran

How It Works in Coats

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Coats. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7